Table of Contents
Advertisement
The following image indicates the location of the speakers and provides a visual representation of the installation procedure.
Steps
1. Align and place the left and right speakers into the slot on the computer.
2. Route the left and right tweeter speaker cables through the routing guides on the system board.
3. Replace the four (M1.6x1.8) screws to secure the left and right speakers in place.
Next steps
1. Install the
system
board.
2. Install the heatsink.
3. Install the
right
fan.
4. Install the
left
fan.
5. Install the Battery.
6. Install the
VPU
card, for systems shipped with a VPU card.
7. Install the
M.2 solid-state
8. Install the
base
cover.
drive, for systems shipped with a solid-state drive.
Removing and installing Field Replaceable Units (FRUs)
99
Advertisement
Table of Contents
