Table of Contents
Advertisement
Operations
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read the Safety information before operating
this appliance.
Control panel
01 Cycle Selector
02 Display
03 Temp.
04 Rinse
05 Spin
Untitled-4 33
01
Turn the dial to select a cycle. (For more information about wash cycles, see
page 37.)
The display shows current cycle information and estimated time remaining, or
an information code if the washer needs to be checked.
Press to change the water temperature for the current cycle.
• Hot (Level 5): Heavily soiled, colorfast items.
• (Level 4): Whites and heavily soiled, colorfast items.
• (Level 3): Colorfast items.
• (Level 2): Brightly colored, very lightly soiled items.
• Cold (Level 1): Uses only cold water without utilizing the washer's heater. No
warm water is supplied.
Press to change the rinse count for the current cycle.
• You can select 1 to 5 rinses.
Press to change the spinning speed for the current cycle.
• High (Level 5): Extends the spinning process to effectively remove
moisture from the load. This level uses a stronger spinning process to
remove moisture, so it is not suitable for wrinkle-free or non-iron fabrics, or
overloads.
• (Level 4): Underwear, t-shirts, jeans, and sturdy cottons.
• (Level 3): Jeans, wrinkle-free or wash-and-wear items, and synthetics.
• (Level 2): Delicate items that require a lower spinning speed.
• No Spin (Level 1): The drum does not spin after the final drain process.
Rinse hold (All indicators are off): The final rinse process is suspended so that
the laundry remains in the water. To unload the laundry, run a drain or spin
process.
02
03
04
05
06
07
10
13
08
11
09
12
14
English 33
2023-08-07
12:16:53
Advertisement
Table of Contents
