[Flash Adjust.] - Panasonic LUMIX DC-G9M2 Operating Instructions Manual

Flash – Setting Flash

[Flash Adjust.]

You can adjust the flash output when taking pictures with the flash in TTL
output mode.
1
Select [Flash Adjust.].

≥
2
Press 21 to adjust the flash output and then press
or .
•
It can be adjusted within the range of [−3 EV] to [+3 EV] in 1/3 EV steps.
•
[ ] is displayed on the recording screen.
•
For information about adjusting the flash output when recording using a wireless
flash ([Flash Adjust.]:
•
[Flash Adjust.] cannot be used when the following are set:
– [Firing Mode]: [MANUAL]
– [Wireless]: [ON]
[ ]  [ ] 
357)
[Flash Adjust.]
350