Serial Port2 Address; Parallel Port Address - Supermicro X5DPA-G User Manual

S
UPER X5DPA-G/X5DPA-GG User's Manual
Select "3F8/IRQ4" to allow the serial port to use 3F8 as its I/O port address
and IRQ 4 for the interrupt address. The options are "Disabled", "3F8/IRQ4",
"3E8/IRQ4", "2E8/IRQ3".

Serial Port2 Address

This option specifies the base I/O port address and Interrupt Request ad-
dress of serial port 2. Select "Disabled" to prevent the serial port from
accessing any system resources. When this option is set to "Disabled", the
serial port physically becomes unavailable. Select "2F8/IRQ3" to allow the
serial port to use 2F8 as its I/O port address and IRQ 3 for the interrupt
address. The options are "Disabled", "2F8/IRQ3", "3E8/IRQ4", "2E8/IRQ3".
Serial Port2 Mode
This feature sets Serial Port2 Mode. The options are "Normal", "IrDA", and
"ASK IR". The default setting is "Normal".
IR I/O Pin Select
This feature allows the BIOS to select Receiver and Transmitting Pin for
Serial Port2. The default setting is "IR Mode".
IR Duplex Mode
This feature allows the BIOS to select Full or Half Duplex for Serial Port2.
The default setting is "IR Mode".

Parallel Port Address

This option specifies the I/O address used by the parallel port. Select
"Disabled" to prevent the parallel port from accessing any system re-
sources. When the value of this option is set to "Disabled", the printer port
becomes unavailable. Select "378" to allow the parallel port to use 378 as
its I/O port address. The majority of parallel ports on computer systems use
IRQ7 and I/O Port 378H as the standard setting. Select "278" to allow the
parallel port to use 278 as its I/O port address. Select "3BC" to allow the
parallel port to use 3BC as its I/O port address. The default setting is "Dis-
abled."
Parallel Port Mode
This feature allows BIOS to select Parallel Port Mode. The options are
"Normal", "Bi-Directional", "EPP" and "ECP". The default setting is
"Normal".
Parallel Port IRQ
This feature allows BIOS to select Parallel Port IRQ. The options are "IRQ
5" and "". The default setting is "IRQ 7".
4-14