Table of Contents
Advertisement
•
Leaving the device with the module separated for an extended period
of time may deform the device or damage the metallic contacts. This
may result in device malfunction.
•
Never separate the module from the device without pressing the
module eject button. This may damage the device.
•
Never remove the module when the device is in use.
•
If a gap occurs between the module and device while you are using
the device, firmly insert the module into the device.
•
If you insert a module that is not compatible with your service
provider, for example, a module bought from other service provider or
in an area that is not covered by your service provider, your device may
not operate normally.
•
Be careful not to hurt your fingers when inserting or removing the
module.
•
Make sure to insert the battery and module correctly. If you insert
them incorrectly, the device may not operate properly or may get
damaged.
•
Failure to follow the instructions in the user guide may damage the
device.
Charging the battery
Before using the device, fully charge the battery.
Connect one end of the charging cable to the charger, insert the other
end of the cable into the cable port, and then plug the charger into a
power socket.
Basic Functions
48
Advertisement
Table of Contents
