Table of Contents
Advertisement
4 Play from
Bluetooth
devices
With this speaker,
you can listen to audio from
Bluetooth-enabled devices.
Note
The speaker can memorize a maximum of eight paired
devices. The ninth paired device will replace the first one.
Any obstacle between this speaker and a Bluetooth
device can reduce the operational range.
Keep away from any other electronic device that may
cause interference.
The operational range between this speaker and a
Bluetooth device is approximately 20 meters (66 feet).
Connect a device
1
Press
for 2 seconds to turn the speaker
on.
The LED indicator
»
On your Bluetooth device, enable
2
Bluetooth and search for Bluetooth devices
that can be paired.
3
Select [Philips S2505] displayed on your
device for pairing and connection. If
necessary, input "0000" as the pairing
password.
blinks blue.
After successful pairing and connection,
»
you will hear the prompt sound and
the LED indicator turns solid blue.
If you cannot find [Philips S2505] on
your device, press and hold
for more than three seconds until you
the prompt sound.
4
Play audio on your Bluetooth device to
start streaming music.
Tip
·
You can use your Bluetooth device to control play.
LED indicator (blue)
Indicator
Bluetooth connection status
Fast blinking (2Hz)
Slow blinking (1Hz) Connecting
Solid blue
Disconnect a device
Short press
current pairing;
To clear the pairing information, press and
hold
for more than 5 seconds until
you hear the prompt sound.
Disable Bluetooth on your device; or
Move the device beyond the
communication range.
»
You will hear the prompt sound and
the LED indicator blinks blue.
Note
Before connecting another Bluetooth device, disconnect
the current device first.
Reconnect a device
When you turn on the speaker, it will reconnect
the last connected device automatically; If not ,
select [Philips S2505] on your Bluetooth device
to start connection.
Pairing
Connected
to disconnect from the
EN
EN
5
5
Advertisement
Table of Contents
