Setting Up The Display; Installation - Philips B line 346B1C User Manual

2. Setting up the monitor

2. Setting up the display

2.1 Installation

1 Package contents
* I/O Cover
* Stand/Base
* DP * HDMI
*USB C-C *USB C-A
*Different according to region.
Install the base
2
1. In order to well protect this monitor
and avoid scratching or damaging of
the monitor, keep the monitor face
down in the cushion for the base
installation.
B line
346B1
Quick
Start
Register your product and get support at
www.philips.com/welcome
Display
User's Manual
使用产品前请阅读使用说明
保留备用
www.philips.com/welcome
This product has been manufactured by and is sold
under the responsibility of Top Victory Investments Ltd.,
and Top Victory Investments Ltd. is the warrantor in
relation to this product. Philips and the Philips Shield
Emblem are registered trademarks of Koninklijke Philips
N.V. and are used under license.
Power
* CD
*USB C-C/A
*USB A-B
2. Hold the stand with both hands.
(1) Gently attach the stand to the
Contents:
User's Manual
Monitor drivers
(2) Use your fingers to tighten the
(3) Use screwdriver to tighten the
3. After attaching the base, erect the
monitor with both hands on holding
the monitor together with styrofoam
firmly. Now you can pull out the
styrofoam. When you pull out the
styrofoam, do not squeeze the
panel to avoid broken panel.
Warning
This product is curve design, when
attach / detach the base, place the
protective material under the monitor
and do not press down the monitor to
avoid the damage.
5
VESA mount area until the latch
locks the stand.Gently attach the
base to the stand.
screw located at the bottom of
the base.
screw located at the bottom of
the base, and secure the base to
the column tightly.