Overheating Protection - Vitek VT-1440 Manual Instruction

Kitchen machine

Hide thumbs

Table of Contents

Available languages

ENGLISH

The medium cutting plate is universal - it suits

–

for processing both raw and cooked products.

The fine cutting plate is suited for processing

–

both raw and cooked meat, fish, etc.

•

Place the food tray (16) on the mouth of the meat

grinder head (17).

•

During the operation use only the pusher (15)

(pic. 10).

•

Use the bowl (5) for processed products.

Note:

For better meat processing, slice it in cubes or

–

stripes. Defrost frozen meat completely.

During the operation use only the pusher (15)

–

supplied with the unit; do not use any other

objects to push meat, do not push meat with

your hands.

•

Place the bowl (5) under the meat grinder

head (17).

•

Insert the power plug into the mains socket.

•

Switch the kitchen machine on by turning the

operation mode switch (11), set the required

operation speed from 3 to 6.

Note: - maximum continuous operation time of the

kitchen machine with the meat grinder attachment

is no more than 7 minutes. Make at least a 15-20

minute break before switching the unit on again.

•

After you finish operating, set the operation

mode switch (11) to the position «0» and unplug

the unit; only after that you can disassemble the

meat grinder attachment.

•

To disassemble the meat grinder head, unscrew

the nut (22) and take out the installed grate (21),

the crossed blade (20) and the screw (18) from

the meat grinder head body.

•

To remove the meat grinder head (17) turn it

clockwise and remove.

•

Wash the parts (15, 16, 17, 18, 19, 20, 21, 22)

with warm water and neutral detergent, rinse

them and dry.

•

Install the lid (14) back to its place.

BLENDER ATTACHMENT

USING THE BLENDER

The blender is used for chopping products, ice,

mixing various ingredients and making cocktails.

•

Remove the lid (13) pulling upwards (pic. 11).

•

Set the blender bowl (25) on the motor unit (8)

and turn it counterclockwise until bumping, the

bowl (25) handle (26) should be on the right side

of the motor unit (8) (pic. 12).

•

Remove the blender bowl lid (24).

•

Put the necessary ingredients into the bowl (25).

•

Cover the blender bowl (25) with the lid (24),

insert the measuring cup (23) into the lid (24)

IM VT-1440.indd 8

opening and turn it counterclockwise until

bumping.

•

Make sure once again that the blender bowl (25)

is installed correctly and fixed.

•

Insert the power plug into the mains socket.

Note: - the kitchen machine will not be switched

on if the blender bowl (25) is installed incorrectly.

•

Switch the kitchen machine on by turning the

operation mode switch (11), set the required

operation speed from "1 to 6".

«1» (low speed) - for mixing liquid products.

«6» (high speed) - for liquid and hard products.

•

During the operation or between the operation

cycles, you can add the required ingredients

into the bowl (25). To do this, turn the measur-

ing cup (23) clockwise and remove it, you can

use the measuring cup (23) as a bowl for add-

ing necessary liquid ingredients. After adding

the ingredients, place the measuring cup (23)

back to its place and turn it counterclockwise

until bumping.

•

After you finish operating, set the operation

mode switch (11) to the position «0» and unplug

the unit; only after that you can remove the

blender bowl (25).

•

Remove the blender bowl (25) from the motor

unit (8) by turning it clockwise.

•

Remove the lid (24) from the bowl (25) and take

the processed products out of the bowl (25).

•

After the operation is finished, wash the blender

bowl (25).

Note: - if food processing is hard, add some liq-

uid (water, liquor, juice) into the blender bowl (25).

•

Before starting to chop/mix, we recommend to

peel fruit, remove inedible parts, such as stones,

and cut fruit into 2х2 cm cubes.

ATTENTION! Continuous operation time of the

blender should not exceed 1 minute, and the break

between operations should be 5-10 minutes.

•

After removing the blender bowl (25) install the

lid (13) back to its place, if the lid (13) is not

installed, the kitchen machine will not switch on.