Pioneer AVIC-Z910DAB System Firmware Update Instructions page 4

7. Select [Firmware Update]. The "Firmware Update" screen appears. Touch [Continue] to
display the data transfer mode.
Wait for the file check (approx. 2 minutes).
8. Select [Start]. The Progress status is shown.
9. Wait until the update process is complete.
device or remove power until you see the "Update Complete" screen.
firmware update process is complete, the unit will display the "Update Complete" screen.
10. Press the HOME button.
11. Remove the SD card or USB storage device.
12. The firmware update is complete.
Check the firmware version as described in paragraph A "Displaying the firmware version" to
confirm that the update was successful.
DO NOT pull out the SD card, USB storage
Once the