Grinder; Adjusting The Grinding Level; Basic Settings - Siemens EQ300 TF301E09 Instructions For Use Manual

en Grinder
Press and hold button
2.
for 3 seconds.
Dispensing takes place, with the
a
button selected flashing.
Once the required filling level is
3.
reached, press the button selected
to stop.
Notes
The new filling level is only appar-
¡
ent when the next drink is dis-
pensed.
You can set the filling level
¡
between 25-60 ml for espresso or
80-200 ml for caffe crema.
The appliance always brews a min-
¡
imum quantity of approx. 25 ml for
espresso and approx. 80 ml for
caffe crema.
Tip: You can change the settings at
any time.
→ "Basic settings", Page 45
Adjusting the frothing time
You can adjust the frothing time of
your drinks.
Fill a large cup or a large glass
1.
with approx. 100 ml milk for cap-
puccino or approx. 150 ml milk for
latte macchiato.
Place the cup or glass under the
2.
outlet system.
Slide the outlet system and milk
3.
frother right down.
Press and hold button
4.
3 seconds.
The milk is frothed up, and the but-
a
ton selected flashes.
Once the required frothing time is
5.
reached, press the button selected
to stop.
Notes
You can set a limited time depend-
¡
ing on the drink.
Setting the frothing time has no im-
¡
pact on the filling level.
44
or for
or Tip: You can change the settings at
any time.
→ "Basic settings", Page 45
8 Grinder
Your appliance has an adjustable
grinder, which you can use to cus-
tomise the grinding level of your cof-
fee beans.
8.1 Adjusting the grinding
level
Set the desired grinding level while
the coffee beans are being ground.
WARNING
Risk of injury!
The grinder rotates.
▶
Never reach into the grinder.
ATTENTION!
Risk of damage to the grinder. The
grinder may be damaged if the grind-
ing level is not set properly.
▶
Only set the grinding level when
the grinder is running.
▶ Select the grinding level using the
rotary selector step by step.
Grinding level Setting
Fine grinding
level for lightly
,
roasted beans
Coarse grind-
ing level for
dark-roasted
beans
Turn rotary se-
lector anticlock-
wise.
Turn rotary se-
lector clockwise.