Restore Factory Settings - Nokia 3500 cb User Manual

Hide thumbs

Table Of Contents

Table of Contents

When security features that restrict calls are in use (such as call restrictions, closed user

group, and fixed dialing), calls may be possible to the official emergency number

programmed into your device.

Select Menu > Settings > Security and from the following options:

● PIN code request or UPIN code request — to request for your PIN or UPIN code

every time the phone is switched on. Some SIM cards do not allow the code request

to be turned off.

● PIN2 code request — to select whether the PIN2 code is required when using a

specific phone feature which is protected by the PIN2 code. Some SIM cards do not

allow the code request to be turned off.

● Call barring service — to restrict incoming calls to and outgoing calls from your

phone (network service). A barring password is required.

to restrict incoming calls to and outgoing calls from your phone (network service). A

restriction password is required.

● Fixed dialling — to restrict your outgoing calls to selected phone numbers if

supported by your SIM card. When the fixed dialing is on, GPRS connections are not

possible except while sending text messages over a GPRS connection. In this case,

the recipient's phone number and the message center number must be included in

the fixed dialing list.

● Closed user group — to specify a group of people whom you can call and who can

call you (network service)

● Security level — Select Phone to request the security code whenever a new SIM

card is inserted into the phone. Select Memory, to request the security code when

the SIM card memory is selected, and you want to change the memory in use.

● Access codes — to change the security code, PIN code, UPIN code, PIN2 code, or

barring password

to change the security code, PIN code, UPIN code, PIN2 code, or restriction password

● Code in use — to select whether the PIN code or UPIN code should be active

● Authority certificates or User certificates — to view the list of the authority or user

certificates downloaded into your phone. See "Certificates," p. 48.

● Security module settings — to view Security module details, activate Module

PIN request, or change the module PIN and signing PIN. See "Access codes," p. 8.