Sony CFI-1018A Safety Manual page 6

Disc handling
• Do not touch the playable side of the disc with your hand when holding the disc. If the
disc gets dirty from fingerprints or dust, it may cause distorted images or decreased
sound quality.
• Do not expose the disc to high temperatures, high humidity, or direct sunlight.
• If you are not using the disc for an extended period of time, store it in its case.
• Use a soft cloth to lightly wipe the disc from the center to the outer edges.
• Do not use substances such as benzene, paint thinner, record cleaner, or anti-static
spray because it may damage the disc.
AC power cord use
• Do not plug the AC power cord for the console into an electrical outlet until you have
made all other connections. Make sure the TV or other component is unplugged from
the electrical outlet prior to connecting it to the console.
• To help ensure safe operation, regularly inspect the AC power cord. If damaged, stop
use immediately and contact Customer Service Hotline (
• Do not use a power cord other than the included AC power cord. The AC power cord is
designed specifically for use with this console only, and should not be used with other
electrical devices.
• Do not touch the plug of the AC power cord with wet hands.
• Protect the AC power cord from being walked on or pinched particularly at plugs,
expansion receptacles and the point where the cord exits from the console.
• Do not place heavy items on the cord.
• Do not allow dust or foreign matter to build up around the AC IN connector. Before
connecting or plugging in the AC power cord, check that there is no dust or foreign
matter in or on the power plug or connecting end of the cord, the electrical outlet or
the AC IN connector on the console rear. If the plug or connector becomes dirty, wipe
off with a dry cloth before connecting.
• Do not place the AC power cord near heating equipment and do not expose the cord
to heat.
• Unplug the AC power cord from the electrical outlet before cleaning or moving the
console, or when you do not intend to use the console for an extended period of time.
When disconnecting, grasp the AC power cord by the plug and pull straight out of the
electrical outlet. Never pull by the cord and do not pull out at an angle.
• Do not connect the AC power cord to a voltage transformer or inverter. Connecting the
AC power cord to a voltage transformer for overseas travel or an inverter for use in an
automobile may cause heat to build up in the console and may cause burns or a
malfunction.
Never disassemble or modify the console or accessories
Use the console and accessories according to the instructions in the product
documentation. No authorization for the analysis or modification of the console or
accessories, or the analysis and use of its circuit configurations, is provided.
6
Unauthorized modification of the console or accessories will void your warranty. There
are no user serviceable components inside the console.
Additionally, there is a risk of exposure to laser radiation as well as to electrical shock.
Network
• A broadband connection is required to access the internet. Note that dial-up
connectivity is not supported.
• You are responsible for internet service fees. For details, refer to the information
provided in your service contract or contact your internet service provider.
• Do not use a cord for a standard residential telephone line or cables of types other
than those mentioned here. Using the wrong type of cord or cable can cause more
electrical current than necessary to flow through the LAN port, which may lead to heat
build-up, fire or malfunction.
Wireless networking feature
• The frequencies used by the wireless networking feature of this product are the 2.4
back cover).
GHz (WLAN, Bluetooth®)/5 GHz (WLAN) ranges. The 2.4 GHz range of radio waves is
shared by various devices. This product has been designed to minimize the effect of
other devices using the same range. However, in some cases, interference from other
devices may reduce the connection speed, shorten the signal range, or cause the
connection to be terminated unexpectedly.
• When using the console scan function to select a wireless LAN access point, access
points that are not intended for public use may be displayed. Only connect to an
access point that you are authorized to use.
Moisture condensation
If the console or disc is brought directly from a cold location to a warm one, moisture
may condense either on the lens inside the console or on the disc. Should this occur, the
console may not operate properly. In this case, remove the disc and turn off and unplug
the console. Do not put the disc back in until the moisture evaporates from the console
(this may take several hours). If the console still does not operate properly, contact
Customer Service Hotline.