Pdsmi-Ln4+ Quick Reference - Supermicro PDSMi-LN4 Plus User Manual

PDSMi-LN4+ Quick Reference

Jumpers
JBT1
2 2
JI C1/JI C2
JP3 (*Note below)
JPF
JPG1
JPL1/JPL2/JPL3/JPL4
JWD
Connectors
24-PIn ATX (JPW1)
8-Pin PWR (JPW2)
Compact Flash Power (JWF1)Compact Flash Card PWR Connector (*Note below)
Alarm Reset (JPR1)
Chassis Intrusion (JL1)
COM1(J31), COM2
DIMM#1A,#2A,#1B,#2B
Fans 1-6
FP Control (JF1)
Floppy Connector (J27)
IDE-Primary (J3)
IDE-Compact Flash (J4)
IPMI (J19)
KB/MS(J28)
LAN1-LAN4 (JLAN1/2)
Power Fault (PW3)
PWR LED (JLED)
Printer (J30)
SATA 1-4
Slot 1/Slot 6
Speaker (J9)
USB1/2 (J15)
USB3/4 (J45),USB5/6 (J46) Front Panel Accessible USB headers 3,4,5,6
VGA (JG1)
WOL(WOL)
WOR(JWOR)
LED Indicator
LE 1
LE3/LE4
NICLED3/NICLED4
*Note: For JP3 to work properly, you need to connect the Compact Flash Card PWR
Cable to JWF1 fi rst.
Description
CMOS Clear
2
I C Bus to PCI Slots 1/2 Ena. Open (Disabled)
Compact Flash Master/Slave Select (Closed: Master)
Power Force-On
VGA Enable
Giga-bit LAN 1/2/3/4 Enable Pins 1-2 (Enabled)
Watch Dog Enable
Description
ATX 24-Pin Power Connector
12V 8-pin PWR Connector
Redundant PWR Alarm Reset
Chassis Intrusion Header
COM Port 1 & COM 2 Header
Memory (DIMM) Slots (1 through 4)
System Fan Headers (Fans 1-5), Fan6: CPU Fan
Front Panel Control Header
Floppy Disk Connector
IDE Primary Slot (Blue) (*Note 5 on Page 1-4)
Compact Flash Card (White) (*Note 5 on Page 1-4)
IPMI 2.0 Socket
PS/2 Keyboard/Mouse Connector
Ethernet RJ45 (Gigabit LAN) Port1-Port4 Connections
Power Fault Header (*See Chapter 2)
PWR LED Header
Parallel Port (Printer) Header
4 Intel SATA Headers
PCI 32-bit 33 MHz (Slot 1)/PCI-X 133 MHz (Slot 6)
Speaker Connector (Pins 3-4:Internal,Pins 1-4:External)
Back Panel Universal Serial Bus Ports 1,2
VGA Connector
Wake On LAN header
Wake On Ring header
Description (*(Refer to Addendum A)
Onboard Standby PWR warning LED Indicator
BIOS POST Code Indicators
LED Indicators for GLAN Port 3/GLAN Port 4
1-5
Chapter 1: Introduction
Default Setting
See Section 2-7
Open (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)