Advertisement
Available languages
Available languages
1. Turn the juicer off by turning the control knob to the OFF
position. Unplug the juicer.
2. Remove the pulp collector the same way you placed it in
position.
HINT: you'll have to tilt it away from the juicer. (Figure 8)
3. Remove the safety locking arm from the juicer cover and
lower it downward out of position so it rests on the side of the
unit. (Figure 9)
4. Remove the filter basket, while the cutting disc is still in
place.
5. To remove the cutting disc, use your fingers to wedge
underneath the side grooves and lift up. (Figure 10)
WARNING
The cutting disc has sharp blades.
Avoid touching the blades to avoid injury.
• All parts are removable and dishwasher safe, with the exception of the motor base.
• After disassembling all removable parts of the juice extractor, wash them by hand with warm soapy
water or in the dishwasher (top shelf only). If the pulp dries out in the pulp collector container, the filter
or the filter basket, let it soak in water for approximately 10 minutes before washing it.
• Wipe the motor base with a damp cloth.
• Cleaning the Rinse 'n Ready filter: As soon as you finish juicing, rinse the filter with running water to
avoid the pulp drying and clinging to the filter. If needed, you might use a soft sponge to remove any
remaining residue.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER OR ANY OTHER LIQUID.
• Some plastic parts might stain when in contact with some fruits and vegetables for too long. In order to
avoid this from happening, all parts should be washed immediately after each use.
• This appliance has no user serviceable parts. Any servicing beyond that described in the Cleaning
Section should be performed by an Authorized Service Representative only. See Warranty Section.
FPSTJE9000 Series_19SEM1 (LA).indd 8
AFTER USE
CARE AND CLEANING
MAINTENANCE
Figure 8
Figure 9
Figure 10
Eng lish -8
3/7/19 08:52
Advertisement
