Front Panel - Mitsubishi Electric MSY-GS18NA Operating Instructions Manual

Indoor unit
Hide thumbs Also See for MSY-GS18NA:
Table of Contents

Advertisement

Available languages

Available languages

C
LEANING
Instructions:
• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
• When dirt stands out, wash it with kitchen neutral detergent diluted with luke-
warm water to the specifi ed concentration, then wipe off the detergent with a
damp towel.
Air fi lter (Nano platinum fi lter)
Clean every 2 weeks
• Remove dirt by a vacuum cleaner, or rinse with water.
• After washing with water, dry it well in shade.
What is "Nano platinum fi lter"?
Nano platinum is a ceramic particle that includes a platinum nano-
particle. The particles are incorporated into the fi lter material, which
results in providing semi-permanent antibacterial and deodorizing
characteristics for the fi lter. Nano platinum surpasses the catechin
(a biofl avonoid that is found in green tea) in performance. Nano
platinum fi lter uses this compound not only to improve air quality
but also to eliminate bacteria and viruses. This air fi lter has a semi-
permanent lasting effect even after washing it with water.

Front panel

Hinge
Hole
1. Lift the front panel until a "click" is heard.
2. Hold the hinges and pull to remove as shown in the illustration above.
• Wipe with a soft dry cloth or rinse it with water.
• Do not soak it in water for more than two hours.
• Dry it well in shade.
3. Install the front panel by following the removal pro-
cedure in reverse. Close the front panel securely
and press the positions indicated by the arrows.
• Do not use a scrubbing brush, a hard sponge, or the like.
• Do not soak or rinse the horizontal vane.
• Do not use water hotter than 50°C.
• Do not expose parts to direct sunlight, heat, or fi re to dry.
• Do not apply excessive force on the fan as it may cause cracks or breakage.
Air cleaning fi lter
(Anti-Allergy Enzyme Filter)
Back side of air fi lter
Every 3 months:
• Remove dirt by a vacuum cleaner.
When dirt cannot be removed by vacuum cleaning:
• Soak the fi lter and its frame in lukewarm water before rinsing it.
• After washing, dry it well in shade.
Every year:
• Replace it with a new air cleaning fi lter for best performance.
• Parts Number
MAC-408FT-E
(Microparticle catching fi lter, option)
Removes the microparticles from the air by
means of static electricity.
Back side of air fi lter
Clean every 3 months:
• Remove dirt by a vacuum cleaner.
• Put it back to its original position, and install all tabs of the air cleaning
fi lter.
• Do not wash it with water. Replace it with a new air cleaning fi lter when
tobacco tar or oil stains adhere to it.
Every 3 year:
• Replace it with a new air cleaning fi lter for best performance.
• Parts Number
MAC-EMF515FT-E
Pull to remove from the air fi lter
• Clean the fi lters regularly for best performance and to
reduce power consumption.
• Dirty fi lters cause condensation in the air conditioner
which will contribute to the growth of fungi such as
mold. It is therefore recommended to clean air fi lters
every 2 weeks.
Important
En-12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msz-gs18naMsz-gs18na-u1

Table of Contents