Table of Contents
Advertisement
en first time
Pull the tab on the glassZone up
2.
and forwards
Set the slider to ON.
3.
Clean under running water.
4.
Place the glassZone in the top
5.
basket and lock in position
Check that the mounts are in the
correct position.
The glassZone audibly clicks into
a
position
.
Push in the top basket.
6.
26
.
.
first time
10 Before using for the
first time
first time
10.1 Performing the initial
configuration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
Requirement: The appliance has
been installed and connected.
→ Page 12
Add special salt. → Page 28
1.
Add rinse aid. → Page 29
2.
Switch on the appliance.
3.
→ Page 35
Setting the water softening system.
4.
→ Page 27
Set the amount of rinse aid to be
5.
dispensed. → Page 30
Add detergent → Page 30.
6.
Start the Programme with the
7.
highest cleaning temperature
without tableware.
To remove any marks from water
or other residues, we recommend
you operate the appliance without
tableware before using it for the
first time.
Tip: You can change these settings
and other Basic settings → Page 37
at any time.
Advertisement
Table of Contents
