Table of Contents
Advertisement
13. COM Port headers
These headers are for serial (COM) ports. Connect the serial port module
cables to these headers, then install the modules to slot openings at the back
of the system chassis.
14. COM Debug header
This header allows connection to a COM Debug card.
The COM Debug Card is purchased separately.
15. Intel
ME jumper
®
This jumper allows you to enable or disable the Intel
this jumper to pins 1-2 to enable (default) the Intel
pins 2-3 to disable it.
Disable the Intel
16. Front panel audio header
This header is for a chassis-mounted front panel audio I/O module that
supports HD audio standard. Connect one end of the front panel audio I/O
module cable to this header.
•
•
17. LPT header
The LPT (Line Printing Terminal) header supports devices such as
a printer. LPT standardizes as IEEE 1284, which is the parallel port
interface on IBM PC-compatible computers.
18. M.2 slot (Key E)
This slot allows you to install an M.2 (WIFI) module.
The M.2 Wi-Fi module is purchased separately.
1-4
ME function before updating it.
®
We recommend that you connect a high-definition front panel audio
module to this header to avail of the motherboard's high-definition
audio capability.
If you want to connect a high-definition front panel audio module to
this header, set the Front Panel Type item in the BIOS setup to [HD
Audio]. By default, this header is set to [HD Audio].
ME function. Set
®
ME function and to
®
Chapter 1: Product Introduction
COM
PIN 1
COM_DEBUG
PIN 1
DIS_ME
1
2
2
3
Normal
Disable ME
(Default)
AAFP
HD-audio-compliant
pin definition
PIN 1
Advertisement
Table of Contents
