Table of Contents
Advertisement
Important:
stabilizer/conditioner over 90 days.
10.
Remove the spark plug(s) and check its
condition; refer to
(page
35). With the spark plug(s) removed from
the engine, pour 2 tablespoons of engine oil into
the spark plug hole. Use the starter to crank the
engine and distribute the oil inside the cylinder.
Install the spark plug(s). Do not install the wire
on the spark plug(s).
11.
Clean any dirt and chaff from the top of the
mower.
12.
Scrape any heavy buildup of grass and dirt
from the underside of the mower, then wash the
mower with a garden hose.
13.
Check the condition of the drive and mower
belts.
14.
Check and tighten all bolts, nuts, and screws.
Repair or replace any part that is worn or
damaged.
15.
Paint all scratched or bare metal surfaces. Paint
is available from your Authorized Service Dealer.
16.
Store the machine in a clean, dry garage or
storage area. Remove the key from the ignition
switch and keep it in a memorable place. Cover
the machine to protect it and keep it clean.
Do not store gasoline with
Servicing the Spark Plug
51
Advertisement
Table of Contents
