Sharp AR-C360P Job Management Manual page 141

6
6-141 Imposition settings
settings.
Binding
To enable binding settings and disable gang printing, select
Binding. When binding settings are enabled, you can specify the
binding method, the binding edge of each page (left or right), and
the number of pages per saddle group. DocBuilder Pro
compensates automatically for binder's creep according to the
specified binding method, the number of pages in a saddle group,
the layout in use, and the size of the job.
If you are using a layout with more than two columns or
Note:
rows, the Binding selection is unavailable.
You can specify the following binding edge options:
—Specifies binding across the left edge of the booklet.
Left Edge
The booklet reads from left to right.
—Specifies binding across the right edge of the
Right Edge
booklet. The booklet reads from right to left.
You can specify any of the following binding methods:
—Specifies a group of folded sheets stitched or stapled on a
Saddle
common, centered fold line. Saddle-stitched binding is the most
common type of binding, and is usually used for booklets.
—Specifies signatures folded and stacked for binding. The
Perfect
spine edges are trimmed and glued together.
—Specifies a combination of saddle and perfect
Nested Saddle
Sharp AR-C360P EFI Job Management Guide - 141