Listening To The Radio - Sharp DK-CL3P Operation Manual

Listening to the radio (continued)
DK-CL3P
ENGLISH
3
Tune to the desired station.
Manual tuning:
Press the TUNING (
required to tune in to the desired station.
Auto tuning:
When the TUNING (
than 0.5 seconds, scanning will start automatically and the
tuner will stop at the first receivable broadcast station.
Notes:
●
After 5 seconds the tuner
frequency will change to time
display. To preview the tuner
frequency, press DISPLAY(TV
OUT) button.
●
When radio interference occurs,
auto scan tuning may stop
automatically at that point.
●
Auto scan tuning will skip weak signal stations.
●
To stop the auto tuning, press the TUNING (
again.
Receiving an FM stereo transmission:
●
If the FM reception is weak, the reception will auto changes
to monaural, and the sound becomes clearer.
■ Programming a station
You can store 20 FM stations in memory and recall them at the
push of a button. (Preset tuning)
1
Perform steps 1 - 3 in "Tuning" on pages 14 - 15.
2
While the Tuner frequency is display, press the
MEMORY button for more than 2 seconds on the main
unit to enter the preset tuning saving mode.
E-15
or ) button as many times as
or ) button is pressed for more
MHz
FM
FM TUNER
indicator
or ) button
MHz
FM
3
Within 5 seconds, press the MEMORY button
repeatedly to select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 5 seconds, press and hold the MEMORY button
on main unit to store that station in memory.
If the preset number indicators disappear before the
station is programmed, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station
previously programmed for that preset channel number will
be erased.
Note:
The backup batteries function protects the programmed stations
should there be a power failure or the AC/DC adaptor becomes
disconnected. If the backup batteries are drain off, the
programmed stations will be erased.
■ To recall a programmed station
Press MEMORY button repeatedly to select the desired
programmed station.
MHz
FM