Table of Contents
Advertisement
Electrical Connection (3-wire)
(cont.)
Bare Wire Connection
Eyelet Connection
4
1
1
1
To make a bare wire connection, use holes on the left
Attach line #1 (black) and line #2 (red)
side of the terminal block. To connect eyelet style
leads to outside terminal. Attach neutral wire (white)
wires, use holes on right side of terminal.
to center terminal on the terminal block.
6
5
1
Reattach access door.
Push supply cord toward terminal
block to relieve strain, reattach supply cord strain
relief bracket over supply cord.
16
Advertisement
Table of Contents
