Related Manuals for Color imagination MINISPOT 50 SI-098
Summary of Contents for Color imagination MINISPOT 50 SI-098
- Page 1 SI-098 MINISPOT 40°C 150°C 0.2m User Manual KEEP THIS MANUAL FOR FUTURE NEEDS...
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS CAUTION Becareful with your operations.With a dangerous voltage you cansuffer a dangerous electric shock when touching wires! This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. - Page 3 UNPACKING Thank you for choosing our MINISPOT 50 . For your own safety, please read this manual before installing the device. This manual covers the important information on installation and applications. Please install and operate the fixture with following instructions. Meanwhile, please keep this manual well for future needs. The MINISPOT 50 is made of a new type of high temperature strength of engineering plastics and cast aluminum casing with nice outlook.
-
Page 4: Features And Specifications
FEATURES & SPECIFICATIONS Features • A 50W white LED lamp • 50000 hours life span and low power consumption • 8/16 bit smooth and precise resolution for PAN/TILT movement • 360°/540°/630° PAN and 90°/180°/270° TILT movement • Scan position memory, auto reposition after unexpected movement •... -
Page 5: Specifications
Specifications Input Voltage: AC90-260V 50/60Hz LED Quantities: 1*50W white LED Control Signal: DMX512, master-slave and sound activated or auto operation Control Channel: 11/13 DMX channels USITT DMX-512 Power Consumption: Dimensions: 149(D)*270(W)*366(H)mm Packing Dimensions: 350(D)*450(W)*240(H)mm Net Weight: 6.6kg Gross Weight: 7.6kg PHOTOMETRIC DATA Photometric Beam Angle Data ×... -
Page 6: Installations
OPERATION INSTRUCTIONS · The MINISPOT 50 is for spot effect for on-site decoration purpose. · Don’t turn on the fixture if it’s been through severe temperature difference like after transportation because it might damage the light due to the environment changes. - Page 7 Never stand directly below the device when mounting, removing, or servicing the fixture. from a ceiling, or set on a flat level surface (see illustration below). Be sure this fixture is kept at least 0.5m (1.5 ft) away from any flammable materials (decoration etc.). Always use and install the supplied safety cable as a safety measure to prevent accidental damage and/or injury in the event the clamp fails.
-
Page 8: Dmx-512 Control Connections
Regardless of the rigging option you choose for your MINISPOT 50, always be sure to secure your fixture with a safety cable. The fixture provides a built-in rigging point for a safety cable on the hanging bracket as illustrated above. Be sure to only use the designated rigging point for the safety cable and never secure a safety cable to a carrying handle. -
Page 9: Menu Operations
For installations where the DMX cable has to run a long distance 120 Ω or is in an electrically noisy environment, such as in a discotheque, it is recommended to use a DMX terminator. This helps in preventing corruption of the digital control signal by electrical noise. -
Page 10: Dmx Channels
DMX CHANNELS Mode/Channel Function Values Description 0-255 PAN Movement Pan-fine 0-255 Fine control of Pan movement Tilt 0-255 Tilt Movement 0-255 Tilt-fine Fine control of Tilt movement 0-225 max to min speed Speed 226-235 blackout by movement Pan/Tilt 236-245 blackout by all wheel changing 246-255 no function 0-15... - Page 11 64-95 Strobe effect slow to fast Shutter 96-127 Shutter open 128-159 Pulse-effect in sequences slow to fast 160-191 Shutter open 192-223 Random strobe effect slow to fast 224-255 Shutter open Dimmer 0-255 Dimmer 0%...100% Focus 0-255 In(near) to out(far) Prism & 6-127 Rotating 128-255...
-
Page 12: Maintenance And Cleaning
MAINTENANCE AND CLEANING The following points have to be considered during the inspection: 1) All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded. 2) There must not be any deformations on the housing, color lenses, fixations and installation spots (ceiling, suspension, trussing). - Page 13 .12.
- Page 14 ADD 3rd Floor, No. 288, Guangzhu East Line, Pingwen, Lanhe Town,Nansha District, Guangzhou, China Tel. +86 20 8499 2310/2320/2330 Fax +86 20 8499 2360 E-mail info@color-imagination.com Website www.color-imagination.com www.facebook.com/color.imagination.1 Follow us on www.youtube.com/user/colorimaginationj twitter.com/colorimaginej...