Tools, Supplies, And Required Equipment - Traxxas DRAG SLASH Manual

For more information on
batteries, see Use the Right
Batteries on page 13.
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Traxxas Ultra Premium Tire
Glue, part #6468 (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Phillips screwdriver
• Soldering iron
8 • DRAG SLASH

TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT

Your model comes with a set of specialty metric tools. You'll need to purchase other items, available from your hobby dealer, to operate and
maintain your model.
Supplied Tools and Equipment
2.5mm "L" wrench 2.0mm "L" wrench
Optional pinion gear Body clips and
body washers
Required Equipment
Use the Traxxas 2s 7600mAh
LiPo battery pack (part #2869X)
for best 2s drag performance
6 or 7-cell NiMH battery pack, or 2s or 3s LiPo
battery pack, with Traxxas High-Current connector
Traxxas Power Cell LiPo iD® batteries are strongly recommended
for maximum performance and safer charging
*Battery and charger style are subject to change and may vary from images.
1.5mm "L" wrench Turnbuckle
wrench
Foam battery spacer Preload spacers and
shock pistons
EZ-Peak Dual
™
(part #2972)
Traxxas iD battery charger
Traxxas recommends you choose a genuine
Traxxas EZ-Peak® iD charger for safer charging,
maximum battery life, and performance
4-way Antenna nut
wrench wrench
4 AA alkaline batteries