Table of Contents
Advertisement
Printing Ribbons/Tapes
(continued)
NOTE
• When you set [Chain Print], feed the ribbon/tape
before using the cutter, otherwise a part of the
text may be cut off.
• When you set [Half] or [Narrow], the displayed
ribbon/tape length is the length from the printed
dots () to the end of the label. Cut along the
printed dots (:) with scissors.
LCD
Full
Half
Narrow
• To print more than one copy of a label with
minimum margins, set the margin to [Narrow].
• Do not pull the tape because this may damage
the tape cassette.
Printout
ABC
67 mm
ABC
41 mm
ABC
25 mm
Saving Ribbon/Tape Files
You can save up to 15 labels and recall them
for printing at a later date. A maximum of
80 characters can be saved per file, a maximum
of 1200 characters can be saved in total memory.
You can also edit and overwrite the stored labels.
Save
Enter Text
/
[Save]
Print
/
[Print]
/
/
-
Open
/
[Open]
/
NOTE
• You can also enter the File menu by pressing
.
• If you try to store a label when there is already
a label stored to that number, a message
"Overwrite OK?" appears. Press
your new label. Press
• You must enter some text before using the save
function.
/
[File]
/
/
[File]
/
[Copies: ]
/
[File]
to cancel.
to save
Advertisement
Table of Contents
