Fusedalti; Find Back - Suunto TRAVERSE ALPHA 2.0 User Manual

Table of Contents

3.9 FusedAlti

FusedAlti

provides an altitude reading that is a combination of

GPS and barometric altitude. It minimizes the effect of temporary

and offset errors in the final altitude reading.

NOTE: By default, altitude is measured with FusedAlti during

recordings that use GPS and during navigation. When GPS is

switched off, altitude is measured with the barometric sensor.

If you do not want to use FusedAlti in altitude measurement, set

your reference value with altitude or sea level pressure.

You can search for a new reference value with FusedAlti by

activating it in the options menu under ALTI-BARO » Reference »

FusedAlti.

In good conditions it takes 4-12 minutes for FusedAlti to find a

reference value. During that time, Suunto Traverse Alpha shows

barometric altitude with '~' before the reading to indicate that the

altitude may not be correct.

Suunto Traverse Alpha automatically saves the starting point of

your recording if you are using GPS. With Find back, Suunto

Traverse Alpha can guide you directly back to your starting point

(or to the location where the GPS fix was established).

To find back:

1. Keep [NEXT] pressed to access the options menu.

Table of Contents