System Functions - Samsung WW13T Series User Manual

Operations

System functions

Using System Functions
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial and select the desired system function, and then tap
3. Tap to change the selected function's settings or start the function.
NOTE
To return to the main screen, tap
AI Pattern
This function saves frequently used cycles and settings. When you turn the function on, the washing
machine remembers the cycles you use most and their settings (Temp., Rinse, Spin) and displays them in
frequency order.
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial to select AI Pattern, and then tap
3. Tap to select On or Off.
- The default setting is On. Set it to Off if you do not want to use this function.
- When you turn off the function, all the saved data resets.
Alarm
You can turn on or off the melody of cycle completion. However, the other sounds stay active.
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial to select Alarm, and then tap
3. Tap to select On or Off.
- The default setting is On.
NOTE
The setting remains unchanged even if you restart the washing machine.
Calibration
You can run calibration again for accurate weight detection.
1. Tap and hold for 3 seconds.
2. Turn the Navigation dial to select Calibration, and then tap
- Calibration does not start if the door is not closed properly.
- The drum rotates clockwise and anticlockwise for about 3 minutes.
3. When calibration is complete, the "Calibration complete" message appears on the display and the
washing machine turns off automatically.
42 English
Untitled-6 42
again or turn the Navigation dial to select Back and tap
.
.
.
.
.
2022-03-18 5:32:35