Programs Table; Programs Description - Hotpoint HFC 3C41 CW X Daily Reference Manual

PROGRAMS TABLE

Program
1. Eco
2. Auto Intensive
3. Auto Mixed
4. Auto Fast Wash
5. Rapid 30'
6. Good Night
7. Sanitizing
8. Soak
9. Self-Clean
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories:
For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature
and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and
sensor calibration. The sensor calibration can increase program duration up to 20 min.

PROGRAMS DESCRIPTION

Instructions on wash cycle selection.
1 ECO
Eco programme is suitable to clean normally soiled tableware, that for
this use, it is the most efficient programme in terms of its combined
energy and water consumption, and that it is used to assess complian-
ce with the EU Ecodesign legislation.
2 AUTO INTENSIVE
Automatic program for heavily soiled dishes and pans (not to be used
for delicate items).
3 AUTO MIXED
Automatic program for normally soiled pans and dishes.
4 AUTO FAST WASH
Automatic program for limited quantity of normally soiled crockery.
Ensures optimal cleaning performance in shorter time.
5 RAPID 30'
Program to be used for half load of lightly-soiled dishes with no dried
food residues. Does not have drying phase.
Available options
50°
65°
55°
-
50° -
-
50° -
50°
-
65°
- -
-
-
65° -
Duration of
wash program
*)
(h:min)
**)
3:10
2:00 - 3:10
1:30 - 2:30
0:55 - 1:20
0:30
3:30
1:40
0:12
0:50
6 GOOD NIGHT
Suitable for night-time operation of the appliance. Ensures optimal cle-
aning and drying performance with the lowest noise emission.
7 SANITIZING
Normally or heavily soiled crockery, with additional antibacterial wash.
Can be used to perform maintenance of the dishwasher.
8 SOAK
Use to refresh crockery planned to be washed later. No detergent to be
used with this program.
9 SELF-CLEAN
Program to be used to perform maintenance of the dishwasher, to be
carried out only when the dishwasher is EMPTY using specific deter-
gents designed for dishwasher maintenance.
Notes:
Please note that cycle Rapid 30' is dedicated for lightly soiled dishes.
Water Energy
consumption consumption
(litres/cycle) (kWh/cycle)
9.5 0.75
14.0 - 17.0 1.50 - 1.85
14.5 - 16.0 1.15 - 1.30
13.0 - 14.5 1.15 - 1.25
9.0 0.50
15.0 1.15
10.0 1.30
4.5 0.01
8.0 0.85
EN
3