Important Safety Instructions Uniden does not represent this product to be waterproof. Do not expose this product to Rain or Moisture. NOTE This product is intended for use in a motor vehicle. Don’t install the device where it will block the driver’s view of the road (including the mirrors!) or the deployment of the airbag.
Power Off ....................... 9 Record Mode ...................... 10 Photo Mode ....................... 10 Playback Mode ....................11 Menu Settings .....................12 Connecting to a PC ..................14 Geotagged Video ....................14 Troubleshooting ............16 Specification ..............17 Warranty ................18 UNIDEN iGO CAM 40 Vehicle Recorder...
USB Charging Cable • Owner’s Manual • If any item is missing or damaged, contact your place of purchase immediately. Never use damaged products! • Need help? Get answers at our website: www.uniden.com.au for Australian model. UNIDEN iGO CAM 40 Vehicle Recorder...
Controls & Indicators UNIDEN iGO CAM 40 Vehicle Recorder...
Page 6
Photo Mode: Take a snapshot. Playback Mode: Confirm Selection/Play/Pause. MENU Record Mode: Start emergency recording when recording/Enter Settings menu when not recording. Photo Mode: Enter Settings menu. Playback Mode: Return to previous screen/mode. Speaker Records sound. Lens Speaker UNIDEN iGO CAM 40 Vehicle Recorder...
Sticker mount is difficult to remove after it is installed and will not stick well on a curved/textured or wet surface. NOTE Do not install the product in a location where it can obstruct the driver’s field of vision. NOTE UNIDEN iGO CAM 40 Vehicle Recorder...
To remove the card from the slot, press the edge of the SD card inwards for it to pop out and then pull it out of the slot. Uniden only recommends using good quality MLC/SLC micro SD cards. Please ensure that the SD card used is rated for Dash Cam use.
If you wish to switch the device back on, press and hold the power button for at least 2 seconds. Only use the USB Car Charger Adaptor and USB Charging cable that comes with your device. Any other adaptor might damage the device. NOTE UNIDEN iGO CAM 40 Vehicle Recorder...
Press the OK button to take a snapshot. Press the UP button to return to Record Mode. If the menu is hidden, press any button at the bottom of the device to reveal the menu icons. NOTE UNIDEN iGO CAM 40 Vehicle Recorder...
Press MENU button to return folder selection page and press again to return record mode. If the menu is hidden, press any button at the bottom of the device to reveal the menu icons. NOTE UNIDEN iGO CAM 40 Vehicle Recorder...
OK to save the setting. Turn on/off the Wide Dynamic Range (WDR) feature to improves the overall exposure throughout your entire image. Exposure Set the brightness sensitivity for better effect in different lighting condition UNIDEN iGO CAM 40 Vehicle Recorder...
Page 13
Use this option to format the SD card. (All files will be permanently erased.) Default Setting Resets the device to factory settings. Note that restoring defaults will not erase data on the SD card. Version Display the device firmware version. UNIDEN iGO CAM 40 Vehicle Recorder...
Connecting to a PC The iGO CAM 40 must be connected to a PC by using a USB data cable (not supplied) without the pass through the GPS bracket. The supplied USB cable is for charging and supplying power only. When the device is connected to the PC, ‘USB cable’...
Page 15
Ensure that the PC is connected to the internet to view the map screen. 2. Click on the option Open File and go to the folder that contains the recordings of the iGo Cam 40. You may select and open all files and have it listed in the play list for easier playback.
Cool it down and try again. The recorded video Please ensure the PC is connected to internet. doesn’t show mapping information on the GpsTracker Player. If you still need help, visit our website or call our customer service. UNIDEN iGO CAM 40 Vehicle Recorder...
Audio Codec Storage microSD (up to 32GB), Class 10 and above Power Input 5V 1A Battery Capacity Li-ion 340mAh Operating Temperature 0°C ~ 60°C Storage Temperature -10°C ~ 70°C Working Humidity 10 ~ 80% UNIDEN iGO CAM 40 Vehicle Recorder...
(“Uniden Aust”). Terms of Warranty: Uniden Aust warrants to the original retail purchaser only that the iGO CAM 40 (“the Product”), will be free from defects in materials and craftsmanship for the duration of the warranty period, subject to the limitations and exclusions set out below.
Page 19
Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden at the address shown below. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim.