Page 1
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Kanguru Defender SSD300 1 TB o cerca il tuo prodotto tra le migliori offerte di Hard Disk esterni Kanguru Defender HDD/SSD & Defender HDD/SSD300 User Manual Model no:...
Page 2
Kanguru Solutions will not be held responsible for any illegal use of this product nor any losses incurred while using this product. The user is solely responsible for the copyright laws, and is fully responsible for any illegal actions taken.
Introduction / Package Contents / System Requirements 1. Introduction The Kanguru Defender is a hardware encrypted, tamper proof drive. The Defender contains two partitions: a read-only, CD-ROM partition and a secure, encrypted partition. The CD-ROM partition contains the login application that will allow you to access the secured partition.The secure partition is where you store your data.
Features / Remote Management Capability 1.3 FIPS Approvals and Certification If you purchased a standard Defender HDD or Defender SSD, then your device uses FIPS 197 approved AES hardware encryption. If you purchased a Defender HDD300 or Defender SSD300 (model# KDH3B-300F), then your device has also been certified to meet strict FIPS 140-2 level 2 security requirements.
8.5 - 11ms Weight 10.3 oz Kanguru Defender SSD Capacities 256GB, 480GB Write Cycles 10,000 write cycles / block Mean Time Between Failure 1,000,000 hours Access Time 0.4ms Weight 9.6 oz Kanguru Solutions defines a gigabyte (GB) as 1,000,000,000 bytes.
General Operation / Parts and Functions 2. General Operation This chapter contains information on how to use your Kanguru Defender. Please read these sections carefully. 2.1 Parts and Functions Activity Indicator LED Power Indicator LED USB A USB Cable USB Micro-B...
3. Connect the Micro B side of the USB cable to the Defender’s USB port. Connect the A side of the USB cable to your computer. The LED indicators on the side of the drive will light up. You are now ready to begin using your Kanguru Defender drive. USB Micro-B...
Kanguru Defender Manager / Running KDM 3. Kanguru Defender Manager Kanguru Defender Manager (referred to throughout this manual as “KDM”) is the client program preloaded on the Defender’s CD-ROM partition. The user needs to login to KDM in order to access the secure, encrypted partition.
Important Notice About Sleep Mode 3.2 Important Notice About Sleep Mode Do not leave KDM running on a computer that is going into Sleep Mode. If you are still logged into KDM when a computer goes into sleep, it may lead to unexpected behavior which could potentially corrupt your data in a worst case scenario.
The Setup Wizard / Selecting a Setup Language 3.3 The Setup Wizard When you start KDM for the first time you will be greeted by the Setup Wizard. Follow the Setup Wizard instructions to create a security password for your Defender’s secure, encrypted partition. Caution! Once the Setup Wizard has started, you should not disconnect your Defender without either first completing the Setup Wizard or closing the Setup Wizard by clicking on the X button.
3.3.2 Activating On-board Antivirus Protection Note: This section does not apply to Enterprise Edition users. Antivirus for Enterprise Edition is activated through Kanguru Remote Management Console (KRMC). Enterprise Edition users, please contact your administrator. KDM will automatically check if your device has a valid antivirus license key.
Note: This section does not apply to Enterprise Edition users. Kanguru Defender drives can be remotely managed using the Kanguru Remote Management Console (KRMC). KRMC Cloud is hosted on Kanguru’s server and can be enabled on any non-Enterprise Defender drive.
Contact Info 3.3.4 Contact Info Note: This section does not apply to Enterprise Edition users. Your contact info will be saved to the drive. If you are managing your drive using KRMC Cloud, the information entered here will be automatically be imported to the KRMC Cloud server when you register your drive.
Setting a Password 3.3.5 Setting a Password From the Set Password screen: 1. Enter your password in the Password data field. You can enter your password using KDM’s Virtual Keyboard by clicking the VK button. For more information on using the Virtual Keyboard section 3.4.2 Using the Virtual Keyboard to Enter Your Password on page Note: For security reasons, it is recommended that you incorporate letters, numbers and symbols...
3.5 Encrypting Files and Folders on page Caution! Once KDM has started, you should never disconnect your device without first closing the KDM application by clicking the KDM task bar icon and selecting Unmount Kanguru Defender as described in section 5.1 Unmounting Your Defender on page...
Resetting from the Login Screen 3.4.1 Resetting from the Login Screen In the event you have forgotten your password, you can use the ‘Reset to Factory Default’ function to reset your password. This function will restore the device to the factory settings, erasing all saved passwords and data residing on the device’s secure partition.
Using the Virtual Keyboard to Enter Your Password 3.4.2 Using the Virtual Keyboard to Enter Your Password The virtual keyboard feature can be accessed anytime you are required to enter your password in order to prevent key logging applications from recording your key strokes and potentially stealing your password. To use the virtual keyboard to enter your password: 1.
Encrypting Files and Folders 3.5 Encrypting Files and Folders A key feature of the Defender is drag & drop encryption; allowing you to simply drag files directly onto the drive. The Defender automatically encrypts these files as they are transferred to the secure partition, ensuring that your data stays safe and private.
On-board Antivirus 3.6 On-board Antivirus You must register your device with Kanguru Solutions in order to take advantage of the Defender’s on- board antivirus features (see section 3.3.2 Activating On-board Antivirus Protection on page 12). Once your on-board antivirus has been activated, real-time virus scanning is automatically enabled whenever you log into your device.
Device Scan 3.6.1 Device Scan The antivirus console allows you to scan your Defender for known viruses and malware. To scan your Defender: 1. Click on the Scan Device tab at the top of the antivirus console. 2. Click on the Start Scan button to begin scanning your Defender. 3.
Path Scan 3.6.2 Path Scan The antivirus console allows you to scan any path on your computer for known viruses and malware. Note: The Scan Path feature can be disabled on Enterprise Edition drives, please contact your administrator for more information. To scan a path on your computer: 1.
File Scan 3.6.3 File Scan The antivirus console allows you to scan any file on your computer for known viruses and malware. Note: The Scan File feature can be disabled on Enterprise Edition drives, please contact your administrator for more information. To scan a file: 1.
Changing Your Password 3.7 Changing Your Password You can change your security password through the Security Settings. To change your password: 1. Click on the KDM icon located in the task bar and then select Security Settings… from the popup menu. 2.
KRMC Cloud Settings 3.8 KRMC Cloud Settings Note: This section does not apply to Enterprise Edition users. You can enable or disable KRMC Cloud functionality through the Security Settings. To change your device’s KRMC functionality: located in the task bar and then select Security Settings… from the 1.
Changing Languages 3.9 Changing Languages KDM supports several languages. The language is set to English by default. To change the language: 1. Right -click on the KDM icon located in the task bar and then hover your cursor over the Language option in the popup menu.
Online Documentation / About KDM 3.10 Online Documentation You can download digital copies of the Kanguru Defender’s documentation from the internet. To download your Defender’s documentation, right-click on the KDM icon located in the task bar. • Click on Quick Start Guide to download a digital copy of the Defender’s Quick Start Guide.
Standard edition Defender HDD users can also manually search and download available client updaters from the Kanguru Support site. Defender HDD client updaters can be found under the ‘USB Client Software Updates’ forum in the ‘Software Downloads and Updaters’ section (support.kanguru.com).
The SHA256 Checksum tool will generate a 64-character checksum which can be verified against the checksum list published by Kanguru Solutions. This ensures that the updater file was downloaded correctly and wasn’t altered. The SHA256 Checksum tool and a list of valid checksum values can be found on Kanguru’s Support site: https://kanguru.zendesk.com/entries/21747773-sha256-checksum-utility To view and verify your download’s checksum:...
The KDM icon in the task bar will disappear and the Defender’s secure partition will no longer be accessible. Caution! Do not disconnect the Kanguru Defender without first properly unmounting your device as detailed in this section and then safely removing the device from your computer. Doing so may result in...
Safely Removing From Windows 5.2 Safely Removing from Windows Caution! Be sure that the secure partition has been unmounted before attempting to remove the Defender drive. See section 5.1 Unmounting Your Defender on page Please use the Windows ‘Safely Remove Hardware’ function before disconnecting your Defender drive. To safely remove the Defender: 1.
Warranty Information / Tech Support 6. Warranty Information This product carries a 3-year warranty from the date of purchase. Kanguru Solutions is not responsible for any damages incurred in the shipping process. Any claims for loss or damage must be made to the carrier directly.
Proxy Support Appendix A - Proxy Support If your computer uses a proxy server to access the internet, the correct proxy information will need to be configured in KDM. If the KDM client application cannot connect to the internet you will see the following error message: If the computer that the Defender is connected to uses a proxy server to access the internet, click on the Yes button.