Table of Contents
Advertisement
6
When done, use the right arrow button to move the cursor to Done, and then press E.
The network connection screen appears and the verification process starts.
― A connection with the router is established, but the Internet cannot be accessed.
7
When the connection has been verified, the
Internet. If you have any problems using online services, please contact your Internet
service
provider." message appears.
Manual Network Setup (Wireless)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and
DNS server address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are
displayed.
"Success! Your device is connected to the
How to set up manually
1
Set
Network Type
to
Wireless
from the
2
The
Network
function searches for available wireless networks. When done, it displays a
list of the available networks.
3
In the list of networks, press the u or d button to select a network, and then press the
E button twice.
― If the desired wireless router does not appear, select
― If the router cannot be found after retrying, select the
The
Add Network
button appears.
4
If the
Enter the password for (AP Name).
wireless router that does not have security, go to step 7.
5
If the router has security, enter the
PIN).
6
When done, use the right arrow button to move the cursor to Done, and then press E.
The network connection screen appears and the verification process starts.
7
Select
Cancel
while network connections are being attempted. This will stop the
connection.
8
Select
IP Settings
on network connection screen. The
9
Select the field at the top, press E, and then set
entry process for each field in the
― Setting
IP setting
to
Enter manually
manually.
Open Network Settings
page.
Refresh
to search again.
Stop
button.
screen appears, go to step 5. If you select a
Enter the password for (AP Name).
(Security key or
IP Settings
screen appears.
IP setting
to
Enter
manually. Repeat the
IP
Address.
automatically changes
DNS setting
to
Enter
106
Advertisement
Table of Contents
