Samsung ME11A7710 Series Installation Manual page 13

A2. INSTALLATION DAMPER
Damper
House Duct
House Duct
1. Remove the tape securing the
Damper.
2. Assemble the Damper as sliding from
back to front until stopped.
NOTE
Make sure Dampers swing freely.
NOTE
• You must attach the House Duct to
the Exhaust Adaptor after installation
is complete.
• You must seal Exhaust Duct joints
using Duct Tape.
Bracket
The marked Brackets should not
have Vent holes.
NOTE
Apply A1 and A2 equally.
B. Recirculating (non-vented ductless)
B1. Adapting the COVER PANEL for recirculation
Cover
Panel
Back
Panel
NOTE
You must check bracket picture according
to ventilation type at page 12.
1. Make sure the Cover Panel is
assembled properly. (Top assembly)
English 13