LG WTL3-09W Owner's Manual page 25

NOTE
• This function is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
laundry and other factors.
• Reservation can be made up to 19 hours;
- 1 hour interval up to 3 - 19 hours
• This function cannot be set for less than 3 hours.
• To cancel this function, press Delay End button
repeatedly until the reservation is cancelled or
press the POWER button to turn off and on
power.
Soak
This option can be selected to wash heavily soiled
clothes by soaking them in water for some time to
loosen dirt and grime.
• Press and hold Rinse button for 3 seconds to to
set the soak time from between 30 to 180
minutes. The soak time is indicated on the
display.
Setting
Child Lock
Use Child Lock function to disable the controls.
This function can prevent children from changing
programmes or operating this appliance.
NOTE
• Once this function is set, all buttons are locked
except the POWER button.
• When the controls are locked,
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking the Control Panel
1
Turn on the power.
2
3
Adding clothes or adjusting wash options when
Child Lock is on
1
2
3
Unlocking the Control Panel
1
2
Beeper
Use this option to adjust the volume of the sound
and the
CL
and turn the beeper off or on.
• Press and hold the Quick Wash buttons for 3
Press the START/PAUSE button to begin the
cycle.
Press and hold the AI Wash and Spin buttons
simultaneously for 3 seconds to activate this
function.
Press and hold the AI Wash and Spin buttons
simultaneously for 3 seconds to deactivate this
function.
Add clothes or adjust wash options.
Press the START/PAUSE button to begin the
cycle.
Turn on the power.
Press and hold the AI Wash and Spin buttons
simultaneously for 3 seconds to deactivate this
function.
• When this function is deactivated, a beeper
will sound and the remaining time for the
current cycle will reappear on the display.
seconds to adjust the volume of the sound and
turn the beeper off or on.
OPERATION
25