Advertisement
9
Install the tank
Install the bolts into the bracket and tighten evenly.
Do not overtighten!
Mounting Bracket tabs must contact vitreous for proper
gasket compression.
Bolt
Bracket
11
Flush several times and check for leaks.
13
Install the tank lid and the seat. Use the supplied 1/4"-20
seat bolts and washers. Periodically check for leaks for
several days following the installation.
1098812-T01-D
1/4"-20
10
Connect supply and turn on the water.
12
Turn here to adjust the water level if necessary.
-6-
10mm Supply Alimentation
10mm
1.28 gpf
(4.8 lpf)
Advertisement
