Disassembling And Assembling; Rck54-24B-Ec, Rck60-24B-Ec, Rck60-27B-Ec (Side Discharge Mower - Kubota wsm RCK54-24B-EC Workshop Manual

RCK54/60-24B-EC · RCK60-27B-EC · RC60-24/27BR, WSM

[2] DISASSEMBLING AND ASSEMBLING

(1) RCK54-24B-EC, RCK60-24B-EC, RCK60-27B-EC (Side Discharge Mower)

WWW.PlanDeGraissage.ORG
Universal Joint and Belt Covers
1. Remove the universal joint (1).
2. Remove the left and right belt covers (2), (3).
(1) Universal Joint
(2) Belt Cover (Left)
Mower Blades (Center Blade and Outer Blades)
1. Turn over the mower.
2. Unscrew the mower blade screw (5), and remove the spline boss
(4), two cup washers (3), mower blade (2) and dust cover (1).
NOTE
• To remove the blade securely, wedge a block of wood
between one blade and the mower deck in such position that
it will hold the blade safely while loosing or tightening the
blade screw.
(When reassembling)
• Be sure to assemble the two cup washers between the mower
blade and spline boss.
IMPORTANT
• Make sure the cup washer is not flattened out or worn,
causing blade to slip easily.
Replace two cup washers if either is damaged.
Tightening torque Mower blade screw
(1) Dust Cover
(2) Mower Blade
(3) Cup Washer
(4) Spline Boss
(5) Mower Blade Screw
Blade Boss
1. Remove the external snap ring (2).
2. Remove the blade boss (1).
(1) Blade Boss
S-7
ROTARY MOWER
(3) Belt Cover (Right)
W1012580
98.1 to 117.7 N·m
10.0 to 12.0 kgf·m
72.3 to 86.8 ft-lbs
A : Loosen
W1012667
(2) External Snap Ring
W1012871
KiSC issued 11, 2006 A