Table of Contents
Advertisement
Ambient temperature management
Adjust ambient temperature when specific components are installed:
• The ambient temperature must be limited to 45°C or lower if the server has 48 drives and any of the following
components:
– CPU with 270W or lower TDP (except 6434H)
– Memory module with 64 GB or lower capacity
• The ambient temperature must be limited to 35°C or lower if the server has 48 drives and any of the following
components:
– CPU with 350W or lower TDP with standard heat sink
– Memory module with 256 GB or lower capacity
– ConnectX-6 Dx 100GbE QSFP56 2-port with Active Optic Cable
– ConnectX-6 HDR 200GbE QSFP56 2-port with Active Optic Cable
– ConnectX-7 NDR200 QSFP 2-port without Active Optic Cable
– ConnectX-7 NDR400 OSFP 1-port without Active Optic Cable
– ConnectX-7 NDR200 QSFP 2-port with Active Optic Cable, and CPU with 270W or lower TDP is installed.
– ConnectX-7 NDR400 OSFP 1-port with Active Optic Cable, and CPU with 270W or lower TDP is installed.
• The ambient temperature must be limited to 30°C or lower if the server has 48 drives and any of the following
components:
– CPU with 350W or lower TDP with performance heat sink
– GPU adapter
– ConnectX-7 NDR200 QSFP 2-port with Active Optic Cable
– ConnectX-7 NDR400 OSFP 1-port with Active Optic Cable
.
Chapter 1
Introduction
11
Advertisement
Table of Contents
