Siemens SN65ZX48CE User Manual page 38

en Basic settings
Basic setting
TimeLight
Start programme
Tone volume
Button volume
Wi-Fi
Remote Start
1
Factory setting (may vary according to model)
38
Display text Selection
1
S:01 S:00 - S:01
1
SP:01 SP:00 - SP:01
1
SL:02 SL:00 -SL:03
1
bL:02 bL:00 - bL:03
1
Cn:00 Cn:00 - Cn:01
1
rc:01 rc:00 - rc:02
Description
Switch TimeLight on or off.
While the programme is running,
status information is projected onto
the floor below the appliance door
relating to timer programming, the
programme or the time remaining. If
the base panel is pulled forwards or
if the appliance is installed at eye
level with the cabinet front fitted
flush, the display is not visible.
Level "S:00" switches TimeLight off.
Set a default programme for when
the appliance is switched on.
¡ With the setting "SP:00", the last
programme selected is set by de-
fault for when the appliance is
switched on.
¡ With the setting "SP:01", the Eco
50° programme is set by default
for when the appliance is
switched on.
Adjustment of tone volume.
Level "SL:00" switches the signal
tone off.
Set the button volume during opera-
tion. Level "bL:00" switches the but-
ton tones off.
Switch the wireless network connec-
tion on or off.
Level "Cn:00" switches the wireless
network connection off.
Activate or deactivate
→ "Remote Start ", Page 40.
The following settings are possible:
¡ With the setting "rc:00", the func-
tion is permanently deactivated.
¡ With the setting "rc:01", the func-
tion can be selected via the
button.
→ "Activating Remote Start ",
Page 40
¡ With the setting "rc:02", the func-
tion is permanently activated.