Craftsman 917.28924 Operator's Manual page 31

TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM CAUSE
CORRECTION
Battery will not
charge
Loss of drive
1 Bad battery cell(s).
2 Poor cable connections.
3 Faulty regulator (if so equipped).
4 Faulty alternator.
1 Freewheel control in "disengaged"
position.
2 Motion drive belt worn, damaged,
or broken.
1 Replace battery.
2 Check/clean all connections.
3 Replace regulator.
4 Replace alternator.
1 Place freewheel control in
"engaged" position.
2 Replace motion drive belt.
3 Air trapped in transmission 3 Purge transmission.
during shipment or servicing.
Engine "backfires"
1 Engine throttle control not set 1 Move throttlecontrol between
when turning
between half and full speed (fast) half and full speed (fast) position
engine "OFF"
position before stopping engine, before stopping engine.
Engine dies when
1 Reverse operation system (ROS) 1 Turn ignition key to ROS "ON"
tractor is shifted
is not "ON" while mower or other position. See Operation section.
attachment is engaged.
into reverse
., .o
ou [], [iad. the a.p, s wez anti moze or_. maaagemySoIaeoCOm - ier free! I
o Find this and at[ your other product manuals onhne.
oGet a nswers from our team ofhome experts.
o Get a personatized maintenance ptan for your home.
Find information and tools to help with home projects.
anag÷ ho÷÷ I
brougat toyou byso_rs
31