Ahci Configuration - Asus Z8NH-D12 Manual

4.3.5

AHCI Configuration

This menu is the section for AHCI configuration.
Main
AHCI Settings
AHCI CD/DVD Boot Time out
SATA Port1 [Not Detected]
SATA Port2 [Not Detected]
SATA Port3 [Not Detected]
SATA Port4 [Not Detected]
AHCI CD/DVD Boot Time out [35]
Selects the boot time out value for SATA CD/DVD devices in AHCI mode.
Congifuration options: [0] [5] [10] [15] [20] [25] [30] [35]
SATA Port1–4 [XXXX]
Displays the status of auto-detection of SATA devices.
Main
SATA Port1
Device :Not Detected
SATA Port1
SMART Monitoring
SATA Port1 [Auto]
Allows you to select the type of device connected to the system.
Configuration options: [Auto] [Not Installed]
SMART Monitoring [Enabled]
Allows you to set the Self-Monitoring, Analysis and Reporting Technology.
Configuration options: [Disabled] [Enabled]
ASUS Z8NH-D12 Series
BIOS SETUP UTILITY
[35]
BIOS SETUP UTILITY
[Auto]
[Enabled]
Some SATA CD/DVD in
AHCI mode need to
wait ready longer.
Select the type
of device connected
to the system.
4-13