3.2
Connecting to a wireless network using WPS
The ASUS PCE-N53 WLAN Card supports the WPS function that helps you set up
a secure wireless network easily.
IMPORTANT: Ensure that the AP or station you are trying to connect to
supports the WPS function.
To connect PCE-N53 to a WPS-enabled AP or station using the WPS push button:
1. Click the WPS tab.
3. Press the WPS button on the AP
or station to establish a wireless
connection. The picture indicates that
WPS is scanning for the network.
PCE-N53 Wireless Dual-band Card Manual
2. Select Use the WPS button, then
click Next.
4. Click Finish. The picture indicates
that your WLAN card has connected
to the network successfully.
ASUS Wireless Dual-band Card
11