Advertisement
If your DNS-300 does not appear, click Refresh. All DNS-300 devices currently on your
network should appear in the following window:
Note: The default IP address of the DNS-300 is 192.168.0.101.
You now are able to connect to the DNS-300 by highlighting it from the list in the
System Configuration window above.
To change the IP address, click the Set IP button on the System Configuration
window. Enter the appropriate information in the following pop-up dialog displayed
below and then click OK. Please note that there is no default access password.
To open the default file folders provided for the user account, double-click it from the
list in the System Configuration window. A network dialog will open:
14
Advertisement
