Table of Contents
Advertisement
Smart Diagnosis
This function provides useful information for
diagnosing and solving issues with the appliance
based on the pattern of use.
Settings
Various functions are available.
Push Alert
This function is to inform the status notification so
that the user can recognize the appliance status.
The notifications are triggered even if the LG ThinQ
application is off.
NOTE
• If you change your wireless router, internet
service provider, or password, delete the
registered appliance from the LG ThinQ
application and register it again.
• The application is subject to change for the
purpose of improving the appliance without
notice to users.
• Functions may vary by model.
Using the Appliance Remotely
Remote Start
Use a smartphone to control your appliance
remotely. You can also monitor your cycle operation
so you know how much time is left in the cycle.
Using this function
1
Press the Power button.
2
Put the laundry into the drum.
3
Press and hold Remote Start button for 3
seconds to enable this function.
4
Start a cycle from the LG ThinQ application on
your smartphone.
26
NOTE
• Once this function is enabled, you can start
a cycle from the LG ThinQ smartphone
application. If the cycle is not started, the
appliance will wait to start the cycle until it is
turned off remotely from the application or this
function is disabled.
• When this function is turned on, the door is
automatically locked.
Disabling This Function
When this function is activated, press and hold
Remote Start button for 3 seconds to disable this
function. This function must be turned off, so that
the appliance can be used manually.
Download Cycle
Download a new and special cycle that is not
included in the basic cycles on the appliance.
Appliances that have been successfully registered
can download from a variety of specialty cycles
specific to the appliance.
Only one cycle can be stored on the appliance at
a time.
Once cycle download is completed in the appliance,
the product keeps the downloaded cycle until a new
cycle is downloaded.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in
this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to opensource@lge.com.
This offer is valid for a period of three years after
our last shipment of this product. This offer is valid
to anyone in receipt of this information.
EN
Advertisement
Table of Contents
