LG KF300 User Manual page 26

4
F300_Singapore_E_1.0_0801_
Getting started
Memory card formatting
Before you start to use the memory
card you have to format it. After you
insert the memory card, select Menu
o Settings o Memory status o
External memory, then press the
OK key.
This operation should only be done
when you insert the memory card
for the first time. During formatting
various folders will be created for
different data types.
Turning your handset on
Ensure that your SIM card is in your
handset and the battery is charged.
Press and hold the end key until the
power comes on. Enter the SIM PIN
code that was supplied with your SIM
card if the PIN code request is set to
On. After a few seconds you will be
registered on the network.
.i24 24
Turning your handset off
Press and hold the end key until the
power goes off. There may be a few
seconds delay while the handset
powers down. Do not turn the
handset on again during this time.
Access Codes
You can use the access codes
described in this section to avoid
unauthorized use of your phone. The
access codes (except PUK and PUK
codes) can be changed by using
Change codes feature of Settings
menu.
PIN code (4 to 8 digits)
The PIN (Personal Identification
Number) code protects your SIM card
against unauthorized use. The PIN
code is usually supplied with the SIM
card. When the PIN code request is
set to Enable, your phone will request
the PIN code every time the phone
is switched on. When the PIN code
request is set to Disable, your phone
2008.8.8 2:59:13 PM