Table of Contents
Advertisement
Maintenance
Cleaning
Keep the washing machine clean to prevent deteriorated performance and to preserve its life
cycle.
Eco Tub Clean
Regularly run this cycle to clean the tub and to remove bacteria from it.
1. Makes sure the tub is completely empty.
2. Press POWER to turn on the washing machine.
3. Press Cycle to select ECO TUB CLEAN. You can also use Delay End with ECO TUB CLEAN.
4. Press and hold START/PAUSE.
CAUTION
Only run ECO TUB CLEAN when the tub is completely empty. This may cause damage to the
laundry or a problem with the washing machine.
Eco Tub Clean reminder
•
The ECO TUB CLEAN LED blinks on the control panel to remind you to clean the tub. If you
happen to see the indicator blinking after washing is complete, remove the laundry and
run the ECO TUB CLEAN cycle.
•
You can ignore this reminder and continue to run cycles normally because this is
not a system failure. However, the reminder remains active for 6 consecutive cycles
immediately after each cycle is complete.
•
The reminder is activated once every 1-3 months, depending on the cycle count.
•
To keep the tub clean, it is recommended to run Eco Tub Clean on a regular basis.
Lint filter
30 English
WA6000T_WA16T6260_DC68-04152H-00_EN.indd 30
1. Press down the upper area of the filter
case to remove.
2. Unlock the cover, and clean the filter
with running water and a brush.
2020-09-29
12:04:46
Advertisement
Table of Contents
