Specifications - Sharp DK-A10P Operation Manual

Specifications

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
Power source AC 120 V ~ 60 Hz
Power 34 Watts
consumption
Output power Front Speakers: 2 watts minimum RMS per
channel into 12 ohms from 250 Hz to 20 KHz, 10%
total harmonic distortion.
Subwoofer: 5 watts minimum RMS per channel
into 8 ohms from 30 Hz to 250 Hz, 10% total
harmonic distortion.
Speaker 1-way type light-up speaker system
Front Speaker: 2-1/2" (6.5 cm) - 12 ohms - Full
Range
Subwoofer: 4" (10 cm) - 8 ohms - Woofer
Speaker Front Speakers: 4W / Channel
maximum Subwoofer: 10W / Channel
input power
Speaker rated Front Speakers: 2W / Channel
input power Subwoofer: 5W / Channel
Output Headphones: 16 - 50 ohms
terminals (recommended: 32 ohms)
Video output: 1Vp-p
Input Auxiliary (audio signal):
terminals 500 mV/47 k ohms
Dimensions Width: 19-11/16" (500 mm)
Height: 5-7/8" (150 mm)
Depth: 9-7/8" (250 mm)
Weight 11.7 lbs. (5.3 kg)
Tuner
Frequency range FM: 87.5 - 108 MHz
AM: 530 - 1,720 kHz
CD player
Type Single disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter Multi bit D/A converter
Frequency 20 - 20,000 Hz
response
Dynamic range 90 dB (1 kHz)
DK-A10P
DK-A10P (BK)
31