Table of Contents
Advertisement
Hardware Maintenance Manual
42
Note 1
eplacement of some models equipped with graphic adapter
bracket is different.
Please remove the plastic bracket first as the following:
1. Remove the two screws that secure the plastic bracket at the bottom
of the chassis.
2. Lift the plastic bracket out of the chassis.
3. Then remove the adapter as above.
After the Graphic Adapter is installed , install the bracket
as the following:
1. Install the plastic bracket into the chassis so that the screw holes in
the plastic bracket align with those in the chassis. Let the slot on the
plastic bracket clip the adapter.
Hide quick links:
Advertisement
Table of Contents
