User Password - Lenovo 3000 C100 Hardware Maintenance Manual

Hardware Maintenance Manual

User Password

18
Setting, changing, and deleting a Administrator password
To set, change, or delete a password, do the following:
Note
A password can be any combination of up to 16 characters (a-z, and
0-9). For more information, see "Password considerations" on page 17.
1. Start the Setup Utility program (see "Starting the Setup Utility program"
on page 16).
2. From Security menu, select Set Administrator Password and press
Enter.
3. The password dialog box will be displayed. Type the new password,
and press Enter.
4. when prompted to confirm the password, type the password again. If
you type the password correctly, the password will be installed.
To delete a previously set Administrator password, do the following :
Note: When prompted for a password, you must type your Administrator
password.
1. From Security menu, select Set Administrator Password and press
Enter.
2. The password dialog box will be displayed. Enter Current Password and
press Enter. Press Enter in New Password and confirm New Password
dialog. A setup notice will display that changes have been saved.
3. Press Enter to continue.
When a User Password is set, you cannot start the Setup Utility program
until a valid password is typed from the keyboard.
Setting, changing, and deleting a User Password
To set, change, or delete a User Password, do the following:
Note
A password can be any combination of up to 16 characters (a-z, and 0-9).