IdeaPad B460 Hardware Maintenance Manual
Figure 11. Removal steps of system board, ExpressCard slot assembly
(continued)
Unplug the power connector and USB connector in the direction shown by
arrow
, and then remove the system board in the direction shown by arrow
.
3
4
4
3
a
a
When installing: When attaching the system board to the base cover, adjust
the placement of the wireless radio switch and the graphics switch as shown
in
, and make sure that both of the audio jack and the microphone jack are
b
attached to the holes on the base cover as shown in
. Improper placement of
a
the switch or those jacks might cause a damage.
52