1090 Fan Assembly And Heat Sink Assembly - Lenovo IdeaPad Z360 Hardware Maintenance Manual

Lenovo IdeaPad Z360

1090 Fan assembly and Heat Sink assembly

For access, remove these FRUs in order:
• "1010 Battery pack" on page 34
• "1070 DIMM/thermal slot coverr" on page 41
Figure 9. Removal steps of fan assembly and heat sink assembly
Note: Loosen six screws , but do not remove them.
1
Unplug the connector in the direction shown by arrow .
2
1
1
1
2
1
1
1
When installing: Make sure that the fan connector is attached firmly to the
system board.
43