Mowing Tips; Mulching Mowing Tips - Craftsman 917.273642 Owner's Manual

18.5 hp, 42" mower electric start automatic transmission
Table of Contents

Advertisement

MOWING
TIPS
• Mower
should
be properly
leveled for
best mowing
performance.
See "TO
LEVEL
MOWER
HOUSING"
in the
Service
and Adjustments
section
of this
manual.
• The left hand side of mower should
be
used for trimming.
• Drive so that clippings
are discharged
onto the area that has already
been cut.
Have the cut area to the right of the trac-
tor. This will result in a more even distri-
bution
of clippings
and more
uniform
cutting.
• When
mowing
large areas, start by
turning
to the right so that clippings
will
discharge
away from shrubs,
fences,
driveways,
etc.
After one or two rounds,
mow in the opposite
direction
making
left hand turns until finished.
(
_,
i1(
,J
00272
• If grass is extremely
tall, it should
be
mowed
twice to reduce
load and pos-
sible fire hazard
from dried clippings.
Make first cut relatively
high; the second
to the desired
height.
• Do not mow grass when
it is wet.
Wet grass will plug mower and leave
undesirable
clumps.
Allow grass to dry
before
mowing.
• Always
operate
engine
at full throttle
when
mowing
to assure
better
mow-
ing performance
and proper
discharge
of material.
Regulate
ground
speed
by
selecting
a low enough
gear to give the
mower
cutting
performance
as well as
the quality
of cut desired.
• When
operating
attachments,
select
a
ground
speed
that will suit the terrain
and give best performance
of the at-
tachment
being used.
MULCHING
MOWING
TIPS
IMPORTANT:
For best performance,
keep
mower housing free of built-up grass and
trash. Clean after each use.
• The special mulching blade will recut
the grass clippings many times and
reduce them in size so that as they fall
onto the lawn they will disperse into
the grass and not be noticed. Also, the
mulched grass will biodegrade quickly
to provide nutrients for the lawn. Always
mulch with your highest engine (blade)
speed as this will provide the best recut-
ting action of the blades.
• Avoid cutting your lawn when it is wet.
Wet grass tends to form clumps and
interferes with the mulching action. The
best time to mow your lawn is the early
afternoon.
At this time the grass has
dried, the newly cut area will not be
exposed to direct sunlight.
• For best results, adjust the mower
cutting height so that the mower cuts
off only the top one-third of the grass
blades. For extremely heavy grass, re-
duce your width of cut on each pass and
mow slowly.
Max 1/3
• Certain
types of grass and grass
conditions
may require
that an area be
mulched
a second
time to completely
hide the clippings.
When
doing
a sec-
ond cut, mow across
(perpendicular)
to
the first cut path.
• Change
your cutting
pattern
from week
to week.
Mow north to south
one week
then change
to east to west the next
week.
This will help prevent
matting
and
graining
of the lawn.
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dyt 4000

Table of Contents