IdeaPad Y460 Hardware Maintenance Manual
Figure 12. Removal steps of keyboard cover, power board and touch inductive
panel (continued)
Turn the keyboard cover over in the direction shown by arrow
, detach the
5
two FPC connectors in the direction shown by arrows
, and then remove
6 7
the keyboard cover.
6
7
7
6
5
When installing: Make sure that the FPC connectors are attached firmly.
Remove the screws
, and then remove the power board
.
8
9
8
8
9
Step
Screw (quantity)
Color
Torque
M2.5 × 2 mm, flat-head, nylok-coated (2)
White
1.5±0.2 kgfcm
8
Note: Touch inductive panel is fixed on the keyboard cover.
52